Skip to Content
S.O.P.Mission PlanningResupply & CASEVAC Planning

Resupply & CASEVAC Planning

Good units plan for success. Great units plan for problems. Resupply and CASEVAC (Casualty Evacuation) are not afterthoughts — they are part of the mission.

This guide outlines how SPECTRE teams incorporate sustainment and medical contingencies into tactical planning, regardless of game platform.


🎯 Why It Matters

  • No ammo, no fight.
  • No medevac, no recovery.
  • No plan, no survivability.

Planning these components increases mission endurance and minimizes downtime, especially during prolonged engagements or multi-phase operations.


🔧 Resupply Planning

1. Estimate Ammo and Equipment Needs

Before stepping off:

  • Know what each element is carrying (ammo, AT, demo, medical)
  • Plan for worst-case usage based on task and enemy type
  • Rehearse internal ammo sharing if supply is limited

2. Designate a Resupply Method

Your plan should include:

  • Resupply Trigger – E.g., “after objective clear” or “50% ammo status”
  • Resupply Location – Pre-designated point or mobile cache
  • Resupply Source – Logistics team, support unit, dropped cache, fallback base

Brief how resupply will be handled — don’t assume someone else will bring it.


3. Include Redundancies

  • Carry partial spares across teams (e.g., each fireteam with 1x AT round, even if not assigned)
  • Consider cached supplies en route if extended movement is expected

🩹 CASEVAC Planning

1. Define Roles and Priorities

  • Who handles initial aid? (Medic or designated Rifleman)
  • Who carries injured? (If platform allows — otherwise, who covers?)
  • What is the triage protocol? Stabilize and hold, or move and patch?

Even without game mechanics, decide on protocol for handling wounded.


2. Set CASEVAC Conditions

  • At what point do you pull back an injured Warfighter?
  • Where is the Collection Point or fallback zone?
  • Is there a QRF or support asset available for evacuation?

Make these decisions before contact, not during.


3. Coordinate with Support Elements

If available:

  • JTAC / Platoon Lead should know if CASEVAC is limited or delayed
  • Ensure that all elements know the medical handoff chain

If no medical assets exist, plan for self-extraction and regroup.


🧠 Planning Considerations

FactorThink About…
DurationMulti-phase ops need pre-staged supplies
TerrainCASEVAC routes must be passable & covered
Threat LevelAvoid static resupply in high-contact zones
Team StructureWho’s carrying the med gear or spare ammo?

⚠️ Platform-Agnostic Advice

  • If no physical resupply system exists, use “soft limits” — teams report low ammo and simulate running dry
  • If medevac isn’t possible, simulate extraction delays, penalties, or combat loss consequences
  • Use designated areas (vehicles, crates, backpacks) as roleplayed caches or CASEVAC hubs

Final Tip

Every mission has a failure point — planning for sustainment makes sure that point isn’t you.

“The time to think about resupply and casualties is before the first shot.”

Last updated on